鄂尔多斯附近有没有服务

Ozone generator

Current location: home page  >  Ozone generator > Split ozone generator
 Split ozone generator

Split ozone generator

Product Description: the split ozone generator has the characteristics of high dielectric constant, uniform wall thickness, good ovality, high temperature resistance and humidity resistance.

Product price:


Sales Hotline: fifteen billion eight hundred and sixty-six million eight hundred and seventy-eight thousand seven hundred and forty-nine

product details



Split ozone generator Introduction:  
The split ozone generator has the characteristics of high dielectric constant, uniform wall thickness, good ellipticity, high temperature resistance and humidity resistance.
High ozone production per unit discharge area: 1200g / m2 / h (oxygen source).
The discharge tube is assembled in series with multi poles in parallel, which can be flexibly combined into an ozone generator with different ozone concentration and output. The ozone output and concentration can be adjusted from 0% to 100%.
Low voltage silent high frequency discharge, low power consumption and oxygen consumption, high single machine output.
The discharge tube has high impact resistance, power frequency withstand voltage is more than 8Kv, and the equipment has high reliability.
The enamel discharge tube has the advantages of high efficiency, small size, less occupation, maintenance free and long service life.
The ozone concentration of oxygen source can be as high as 120mg / L at room temperature, which is an ideal ozone source generator for high concentration ozone water generation device.
It is the only enamel tube with high efficiency and low heating surface in China.

The following parameters are for reference only:

Serial number

Product name

model

parameter

Quantity (set)

one

PSA oxygen generator

 

 JH-OX60L

 

Oxygen production: 60L / min

Power supply: 220 V / 50 Hz

Power: 50 W

Working pressure: 0.6 MPa

one

two

Screw compressor

 SEC5A-7(8)

Size: 91.5 * 74 * 98cm

Motor power (kw): 11

Power supply: 380V / 50Hz

Exhaust pressure (MPA)

Air displacement (m3 / min)

Outlet size:

Weight: 200kg

one

three

Air tank

 

  SPD-03

 

Volume: 0.3m3

Maximum working temperature: 20 ~ 150 ℃

Maximum working pressure: 0.8MPa

two

four

Freeze dryer

HMR-10HP

Treatment air volume: 1.5m3/min

Maximum pressure: 1.0MPa

Size (mm): 700 * 420 * 760

Power: 550W

Pressure dew point: 2 ℃~ 10 ℃

Refrigerant: R ~ 22

Refrigerant compressor motor: 1 / 3HP

220 v-ac60hz power supply

Air inlet and outlet pipe diameter: 1 inch

Weight: 45kg

one

five

Adsorption dryer

HMR-10HP

Treatment air volume: 1.5m3/min

Size: 600 * 350 * 1720mm

Heating power: 500W

Power supply: 220 V / 50 Hz

Pipe diameter: DN20

Weight: 80-100kg

one

six

Precision filter

Grade p

filter

 

Model: HMR 015

Filter element: (P) level (function: oil filtering)

Pipe diameter (abbreviation of PN pipe diameter): 3 / 4 ″

Maximum pressure bar. G: 1.6Mpa

Size (mm): 267.5 * ¢ 89

 

one

Grade Q

filter

 

Model: HMR 015

Filter element: (q) level (function: filtering water)

Pipe diameter (abbreviation of PN pipe diameter): 3 / 4 ″

Maximum pressure bar. G: 1.6Mpa

Size (mm): 267.5 * ¢ 89

one

seven

Accessories

 

1. Throttle valve

2. Air filter valve

3. Electronic valve

4. (precision) filter element

5. Angle seat valve

6. Pressure gauge

7. Connecting pipe

 

 

Last article: Ozone generator split type

Last article: Ozone generator for water treatment plant

Recommended products

What's new