Ozone is a kind of trace gas in the earth's atmosphere. It has poor stability at normal temperature and pressure, and can decompose into oxygen at normal temperature. Ozone is a strong irritant, and excessive inhalation of ozone is harmful to human health. that How to choose ozone generator (ozone controller) and how to improve the efficiency of ozone?
1. Whether the joint of ozone generator tube is flame retardant material or not should be tetrafluoroethylene. Some manufacturers use ordinary plastics, which have short life and are easy to break down.
2. Check the cooling mode, if the cooling degree is not good, the ozone concentration will be greatly reduced after one or two hours of startup, especially for the small ozone generator.
3. The larger the number of grams of ozone produced by the same volume of ozone generator tube, it shows that the manufacturer has advanced technology, low cost and affordable price.
4. Most of us buy ozone machines for water treatment, sterilization and disinfection. The choice of aeration is very important. Some people think it is OK to have a machine. In fact, the ozone emitted can not be fully dissolved, which is wasted.
First of all, for the electrolysis type and high voltage discharge type ozone generator, if some good electrodes can be used in the production design, its working efficiency can be improved. The performance of the electrode is expressed by the dielectric constant. The higher the dielectric constant, the better the performance of the electrode!
Then, to minimize the loss of electric energy is an effective way to improve the efficiency of ozone generator. In production, as long as the machine's power drive frequency increases, you can achieve the goal!
Finally, the cooling technology of ozone generator is improved. We believe that the higher the cooling technology of the ozone disinfector, the faster the ozone produced by the equipment can be cooled down, thus avoiding the decomposition of ozone due to high temperature.