鄂尔多斯附近有没有服务

News Center

Current location: home page  >  News Center

How to disinfect the ozone generator? What should I pay attention to?

Ozone generator It can be used not only for keeping fresh the well-known fruits and vegetables, but also for dust removal and purification of some special industries, as well as sterilization and disinfection of factory workshops. The purpose of factory disinfection is to prevent the bacteria from entering and leaving the factory. When the ozone generator is used for workshop disinfection, the concentration of ozone should be paid attention to, and the time should be reasonably controlled. The temperature during disinfection should be controlled And humidity should be well controlled, the following details.

Ozone generator

1、 How to disinfect the workshop with ozone generator

1. Sterilization of dressing room and work clothes. Therefore, more attention should be paid to the spread of bacteria through the workshop area. It is reported that most food processing enterprises use ultraviolet radiation for disinfection. However, there is a natural defect of ultraviolet radiation, which is that the disinfection effect is poor and cannot be diffused. However, ozone is a gas type sterilization method. Ozone can be diffused in the air, which can not only penetrate all parts of clothing, but also have good sterilization and disinfection effect on the working table and ground. Therefore, ozone disinfection is a natural defect Poison is undoubtedly the most efficient and simple sterilization method.

2. Sterilization and purification of production water. There are many kinds of bacteria in ordinary water, and ozone dissolves into ozone water in water, which has higher killing rate and faster speed to various bacteria, viruses and microorganisms. The removal of organic compounds and other pollutants in water is more thorough, and ozone will be dissolved into oxygen, so there is no need to worry about secondary pollution, so this must be meaningful for food processing water.

3. Cold storage and preservation disinfection. The main biological pollution of cold storage is mould, which has strong tolerance to chemical agents and can survive at low temperature. However, experiments have shown that ozone with a concentration of 6-120ppm can kill the non germinating spores with strong resistance after continuous disinfection for about three hours. After the completion of ozone sterilization, the cold storage should be closed, and ozone disinfection should be carried out about three days before purchase.

2、 Precautions for disinfection of ozone generator workshop

1. Ozone dosage and concentration: in a workshop, if the total amount of ozone is not up to the predetermined value, then the ozone concentration in the workshop can not reach the required standard, and the disinfection effect is bound to be affected. When calculating the ozone dosage according to the corresponding standard, we must consider the ozone loss in the process of transportation, the occupation of other space, the leakage of doors and windows, and at the same time, we must ensure that the selected ozone generator can reach the designed ozone output index.

2. Uniformity of ozone: in the disinfected workshop, the ozone concentration in the workshop must meet the design standard, otherwise, in the area with low ozone concentration, the disinfection effect will be poor. Therefore, in the design of disinfection scheme, we must carefully consider the structure of the workshop, the mode of ozone delivery, the performance of ozone disinfector and other factors. In particular, when using the independent ozone disinfector, the ozone disinfector must have the ability to deliver ozone in a long distance. Otherwise, if there is no ozone reaching the place far away from the ozone disinfector, there is no disinfection at all. The workshop with small volume can be directly added. The air supply system can be used in the large space workshop, and ozone can be added to the pipe laying or auxiliary blower when there is no room.

3. Ozone disinfection time: after the ozone concentration in the workshop reaches the requirements, if the disinfection time is not enough, the disinfection effect will also be affected, so the disinfection time must be guaranteed.
 Ozone generator
4. Performance of Ozone Disinfector: if the stability of ozone disinfector is poor, the output of ozone will decline after a certain period of time, and the disinfection effect will not be guaranteed. The ozone machine with long life and stable performance should be selected. At the same time, the production workshop is usually long in length and large in span. In order to ensure that all areas in the workshop have ozone arrival, the ozone disinfector must have a strong and far-reaching ability to transport ozone gas, and understand the transmission distance of the ozone machine.

5. Workshop temperature and humidity: humidity, ozone effect is good, the higher the temperature, the faster the decomposition of ozone. The temperature of the workshop is lower than 40 ℃ and the humidity is higher than 70%.

Last article: Working principle of ozone generator and matters needing attention

Last article: Ozone generator selection skills and price factors

Recommended products

What's new