鄂尔多斯附近有没有服务

News Center

Current location: home page  >  News Center

Eight suggestions on ozone generator odor maintenance

Ozone generator Eight suggestions for odor maintenance
 
1. The ozone generator should always be placed in a dry and well ventilated clean environment, and the shell should be reliably grounded. Ambient temperature: 4 ℃ - 35 ℃; relative humidity: 50% - 85% (non condensing state).
 
2. The maintenance of ozone generator must be carried out without electricity and pressure.
 
3. Regularly check whether the electrical parts are damp, whether the insulation is good (especially the high-voltage part), and whether the grounding is good.
 
4. If it is found or suspected that the ozone generator is affected by moisture, insulation test shall be conducted for the machine and drying measures shall be taken. The power button must be in good condition to start.
 
5. Regularly check whether the vent is unobstructed and covered. Do not block or cover vents.
 
6. The ozone generator is usually maintained for more than 4 hours each time.
 
7. After the ozone generator is used for a period of time, the cover should be opened and the dust in it should be carefully removed with alcohol cotton.
 
8. Please cut off the power supply for long-term shutdown.
 
9. Use with caution in inflammable and explosive places.

Last article: What are the layout points of ozone generator ozone disinfection equipment

Last article: Can large ozone generator clean air

Recommended products

What's new