Zhuanghe project air heater supplier ceiling type remote jet water heater nf-ysws (q)!
The heat sink for steam air heater actually refers to the finned tube radiator, the core heat exchange component of the air heater. According to the feedback from after-sales customers, the calculated heat is up to the standard in design and selection, but there is insufficient heating in actual use, that is, the actual heat supply is less than the theoretical heat supply. What's the problem? What are the possible reasons? What is the solution? Don't bother the technician to explain one by one, Ximen electromechanical small editor here to summarize. ① The flow rate in the hot side of the tube is too low, mainly due to the large temperature difference between the inlet and outlet of the hot side. ② The hot side pressure or temperature in the pipe is too low, mainly because the hot air temperature on the cold side is close to the hot side temperature. ③ The performance of the heat exchanger decreases with the time of using the heat exchanger. ④ The uneven flow distribution of multiple parallel heat exchangers is mainly due to the inconsistent inlet and outlet temperatures of each heat exchanger. ⑤ During installation and debugging, the design effect is not achieved, and the pipeline stroke connection is correct, and the insulation measures are ideal. ① If conditions permit.
2. Select the model according to the range and noise requirements, and select the small model with mute requirements. Two types of hot water fan, without fan switch. 3. The hot water type uses copper tube with aluminum foil, and uses 60 ℃ hot water after the air conditioning system plate is replaced; the steam type uses steel tube aluminum fin heat exchanger, using 0. Steam below 4MPa.
1. The product can supply air downward under the hanging shed, or install the horizontal inclined downward air supply on the side wall, which is suitable for large space places such as workshops, large stadiums and waiting hall.
Ecotech has perfect infrastructure, advanced technology and equipment, strong R & D force, and its quality assurance system has passed ISO9001 international standard certification.
More and more machinery and equipment are installed and applied outdoors. They are extremely fragile. They are afraid of cold in summer and hot in winter. Therefore, we must take appropriate measures to protect them. However, compared with the indoor, the external heating conditions are even worse, and the industrial air heater can also complete various tasks well. From the civilian to the national level, there are many kinds of satellite receiving equipment. Only some individuals in civil use the receiving equipment to receive some TV programs to achieve the purpose of watching. However, the receiving equipment used by the air heater of shizhuanghe project is often related to the level. Due to the tight climate, the surface of these equipment installed in the north of China in winter is often frozen by a thick layer of ice, resulting in poor signal reception and easier to shorten the service life of the equipment. For the large-scale receiving equipment invested by the state, it often causes significant economic losses and hidden dangers. The emergence of oil fired industrial heater can solve this kind of problem very well, they can be used in the cold field environment, output high temperature to thaw the equipment.
The company takes "high tech, high quality, service and energy saving" as its business philosophy, continuously absorbs and draws lessons from the advanced technologies of similar international products, refines product classification, optimizes product functions, and provides high cost-effective products to meet the different requirements of customers. Now the sales scope has covered air curtain, heater, air conditioner, air shower room, six series of hundreds of products.
GS-B explosion-proof high temperature hot water heater GS-B explosion-proof high-temperature hot water heater is an extension of the ordinary GS hot water heater. Bt35-35 is suitable for coal mine and chemical industry. Hot water heater with high temperature (above 80 ℃) is used as heating medium. This type of air heater is mainly composed of external rotor axial-flow fan, heat exchanger, grille tuyere, shell, etc. the radiator is composed of four rows of pipes. The heat medium enters from the lower connecting pipe and is discharged from the upper connecting pipe. The heat is conducted through the pipe wall and wound around the fins on the outer surface of the steel pipe to exchange heat with air. The impeller is driven by the motor, forcing the air to flow through the outer fin of the exhaust pipe Get heat, so that the air temperature increases. TS hot water heater is a kind of heating equipment with medium and low temperature hot water (55-75 ℃). This type of air heater is mainly composed of external rotor axial-flow fan, heat exchanger, grille tuyere, shell, etc. the radiator of single air shower chamber is copper tube with aluminum fins. The heat medium enters from the lower connecting pipe, and the upper connecting pipe is discharged. The heat is conducted through the tube wall and wound around the aluminum fin on the outer surface of the copper tube to exchange heat with air. The impeller is driven by the motor, forcing the air to flow through the outer fin of the row tube, thus obtaining heat, thus increasing the air temperature.